Oil cooler m b
Oil cooler m b

MB oil cooler in Karaj

MB oil cooler

study time 1 minute

MB oil cooler in Karaj

Oil suitable for conical crusher

Cone crusher is one of the important devices in the mining and construction industry, which is used to crush minerals and hard stones. For optimal performance and safety and stability reasons, it is essential to use the right oil in this machine. Lubrication in a cone crusher means injecting and using oil in the collision points and moving slides of the device in order to preserve the life of the wires and reduce friction.

Hydrocon oil specifications:

1. Thermal stability: The oil used for cone crusher must have high thermal stability. Because the cone crusher constantly faces high temperatures and thermal shocks in the process of crushing minerals. Oil with proper thermal stability can prevent degradation and decomposition at high temperatures. 2. Proper viscosity: The oil must have proper viscosity. High viscosity may lead to increased friction and reduced machine efficiency, while low viscosity may lead to oil degradation and drying of the wires. Therefore, the viscosity of the oil must be carefully selected. 3. Oxidation resistance: The oil must have oxidation resistance. When exposed to air, oils may oxidize and produce organic acids that damage wires and mechanical parts. Oil with good oxidation resistance can avoid these problems. 4. EP (Extreme Pressure) properties: Due to the high pressures and hard minerals in the cone crusher, the oil must have EP (Extreme Pressure) properties. These features protect the wires in the face of high pressures. 5. Not containing sediment and suspended particles: The oil must not contain sediment and suspended particles. The presence of suspended particles and deposits in the oil may damage the wires and mechanical parts. 6. Easy to use: The oil should be easy to use and inject into the cone crusher. For this purpose, oil injection and monitoring systems must be properly designed and installed. 7. Compliance with standards: The oil must comply with the standards related to the cone crusher and the mining industry.

Oil circulation in hydrocarbon:

The oil first passes through the filters installed in the hydrogen tank. Then it enters the oil pump. After passing through the pump, the oil enters the hydrocon cooler to reduce the temperature. The oil coming out of the hydrocon cooler enters the cell through a tube and is divided into two parts at the end. Its upper part is connected by a hose to the entrance of the congress tube in the body of the missile. A part of it enters the bottom shell to lubricate the congress bushing and the cranville and pinion gears, and a part of it enters it to lubricate the bearings of the housing. The piston and the grooves of the pistons enter the eccentric bush and after overflowing from the upper part of the eccentric bush, it comes out of the buttmussel. Then it enters the oil tank for cooling. Considering the importance of using the right oil in the cone crusher, it is necessary to choose and use oil with characteristics that match the machine's needs and environmental conditions. Also, the used oil should be analyzed daily or periodically and replaced if needed.

Hydroconstal lubrication tank

The crushing process in hydrocon is associated with high friction, and for this reason, a lot of heat is generated between the involved parts. Lubrication and cooling are done so that the device does not lock and the parts do not face problems. Hydrocon cooler and oil tank and Hydrocon lubrication system are like Hydrocon vessels that keep this device alive and working. In order to maintain the life of the parts and optimal operation, an automatic lubrication system with a constant flow of oil is used in the Hydrocon crusher. The spider in the shaft head is lubricated separately. Crankshaft gear and pinion and hydrocon bushings are oiled by flooding method. The hydraulic and pneumatic cell (jack and oil tank) of Hydrocon consists of two parts with the following separate functions

Hydrocon lubrication department: The capacity of the Hydrocon crusher oil tank is 300 liters of 220 oil. The oil first passes through the filters installed in the hydrogen tank. Then it enters the C94 oil pump with a capacity of 60 liters per minute. The pump shaft is connected to a 3 HP dynamo to move. After passing through the pump, the oil enters the Hydrocon cooler to reduce the temperature. The oil coming out of the hydrocon cooler enters the cell through a pipe and is divided into two parts at the end. Its upper part is connected by a hose to the entrance of the congress tube in the body of the buttmussel, a part of which enters the buttmussel for the lubrication of the congress bush and the crankwheel and pinion gears, and a part of it enters it for the lubrication of the housing bearings. to be The second part of the cooled oil from the cell enters the pot through a hose, which after passing through the piston and the grooves of the wheels, enters the eccentric bush, and after overflowing from the upper part of the eccentric bush, it exits the buttmussel, and then enters the oil tank for cooling. will be Hydraulic section of Hydrocon: The capacity of the hydraulic oil tank is 80 liters. The hydraulic oil enters the valve and pressure breaker after passing through the jack pump, which is connected to a 1.5 hp dynamo. From the hydraulic oil pressure breaker, it enters the solenoid valve, which is used to raise and lower the jack.

Mrs. Javadzadeh

Mrs. Javadzadeh

نویسنده پست

10005

مقاله

مشاهده صفحه

SEO-oriented content production specialist with experience in digital marketing and search engine optimization. Focusing on keyword research and content strategy formulation, I produce user-oriented educational and analytical articles to be valuable to the audience and to help grow the site's position in search results.

  • Oil suitable for conical crusher

  • Hydrocon oil specifications:

  • Oil circulation in hydrocarbon:

  • Hydroconstal lubrication tank