Introduction
In the minerals and crusher production units, the use of rock oil cooling is one of the vital parts of the machinery. Maintenance and installation of rock oil cooling equipment increases the life of the machinery, prevents unexpected damage and reduces repair and stop costs.
The Importance of Cooling Oil Cooling in Right Function of Equipment
why is the cooling of the rock oil?
Cooling Oil Oil plays a key role in maintaining the optimal temperature of hydraulic oil and psychiatrists. When the oil temperature rises, it reduces efficiency, accelerates the exhaustion of parts, and even serious damage. Selection, proper installation and maintenance of rock oil cooling are three essential pillars for performance without defects.
Benefits of using oil cooling with proper installation and maintenance
Increase the shelf life of the interior crusher Prevent overheating too much oil Reduce the risk of failure and heavy repairs Production Connection Guarantee Increase productivity and efficiency of the device Reduce current maintenance costs
Choose the best rock oil cooling; Why MB?
In the Karaj market and across the country today, the MB oil cooling brand, using technical knowledge and high quality materials, offers special rock cooling at competitive price and optimal after -sales service. Using technical expertise, using up -to -date technology, and providing consulting when installation and maintenance are among the highlights of MB.
Key Tips Before Installing Cooling Oil Cooler
Initial Review of Installation location
Before installing the ore oil cooling, the location of the physical space, the air circulation, the proximity to the machine, the ability to supply electricity or water (in different models), and access for periodic service. MB products are designed to be installed and exploited even in limited spaces and specific conditions.
Reading the Handbook
Always read the MB stone cooling manual carefully before installing. This booklet contains detailed information about foundation, hydraulic connection, electricity and maintenance requirements.
Health Control of All Connections
Make initial checks on the parts, ensure that leakage in the oil and hoses, checking the health of electric connections and fuses are among the important steps before installing crushed oil cooling.
pay attention to the capacity and proportion of the model
For the proper efficiency, the selection of stone cooling model must be proportional to the volume and type of operation of the machine. MB engineers provide the best advice for the right model selection based on mine conditions and user needs.
basic steps of installing stone cooling of ore oil
1. Correct placement of the device
Cooling ore oil should be mounted on a solid base, alignment and vibration. There is also sufficient space around the machine for air circulation and periodic service. Intensive MB aerial models are suitable for even low -space workshops.
1. Correct connection of hoses and pipes
All hoses and pipes should be attached to the inlet and outlet of the rock oil without twisting and twist. It is best to use the main connections and standard MB gaskets to minimize leakage and pressure drop.
1. Installation and launch of fan or pump
In aerial models, proper fan installation is very important. Electrical connections must be done in accordance with safety issues. It is recommended that the initial launch of the fan and pump be carried out by trained MB specialists.
1. Adjustment of performance temperature
Some MB rock oil coolers can adjust the oil outlet temperature. Proper adjustment of temperature tailored to the operating conditions of the device will make the system higher productivity and save energy.
1. Primary Performance Test
After complete installation, the system should be tested by removing the stone and checking the pressure and temperature of the oil. Any leakage, abnormal sound or vibration must be identified and fixed immediately.
The Principles of Maintenance and Service of Cooling Oil Cooling
Regular maintenance of rock oil cooling has a direct effect on the life of the device and prevents costly failures. The following are the most important maintenance points of this equipment:
1. Cooling Cooling and Fan
dust, flowers and other pollutants can reduce the cooling efficiency of the rock oil. Cleaning the surface of the fins and blades should be done on a monthly basis. It is recommended to use soft brush and compact wind.
1. Timely Replacement of Oil Filter
The oil filter has the task of separating the suspended particles. Any cramps cause pressure drop and reduce efficiency. Filter replacement with the original MB samples as scheduled in the manual.
1. Review and replace hoses and fittings
control all hoses, fittings and gaskets every three months. If you see a crack, rupture or loosen, replace it quickly. MB main spare parts are always available to users.
1. Periodic Code of Oil and Oil Quality
control the oil level and prevent its level of downstream, in addition to extending the cooling life of the rock oil, it also reduces damage to the hydraulic pump. Also check the quality of the oil in terms of transparency and lack of contamination.
1. Fan, Pump and thermostat Performance Review
Listening to an abnormal sound, shaking or heating the fan is a sign of the system. Regular inspection and washing of fan blades and the base of the base guarantees the efficiency of the device. In models with thermostat, its proper operation should be tested monthly.
1. Regular Service and Replacement of District Parts
Some components such as fan, bearings, thermostats and fins become depreciated over time and must be served and replaced according to the MB instructions.
1. Registration and maintenance of the service book
Completion of the service book and registering all maintenance measures will help faster troubleshooting in the future.
1. Tutorials on users and operators
Production and maintenance operators must learn how to work with a cooling oil cooling and identifying warnings from MB specialists.
after -sales service and cooling support of MB oil
One of the strengths of MB oil cooling products is providing after -sales service, warranty, specialized installation and free user training. The representative network of this complex, including Karaj, provides customers with spare parts and consumables easily and quickly. All MB oil cooling customers can get specialized guidance and consulting with the support unit.
Final Summary and Recommendation
Installation and maintenance of rock oil cooling is very important, and key points in this area will guarantee long life, optimal performance and reduce repair costs. The use of reputable products such as MB oil cooling, in addition to high quality, provides specialized services, satisfaction and security to the Karaj and other parts of the country.
